How to Use the Ultrasonic Beauty Machine

This guide will walk you through setting up the machine, adjusting the settings, selecting the correct mode, and ensuring optimal results.

Stage 1: Setting Up the Machine

Before starting your treatment, it is essential to set up the machine correctly. First, plug in the power cord by connecting the device to a power source and ensuring the connection is secure. Next, insert the probes. The small ultrasonic probe should be plugged into the socket designed for eye treatments, while the large ultrasonic probe should be inserted into the corresponding socket for face and body treatments. Once the probes are connected, turn on the device by pressing the power button. The power indicator light will illuminate, confirming the machine is ready for use.

Stage 2: Adjusting the Machine Settings

Once the machine is turned on, you need to configure the settings based on your skin type and treatment needs. Start by setting the timer. Use the left and right buttons under the "Time" setting to adjust the treatment duration. The recommended time is between 8 and 15 minutes per area to prevent cell fatigue. Next, select the probe mode by pressing the "Select" button. The corresponding indicator light will turn on, showing which probe is active.

Choose the ultrasound mode based on your treatment goals. Press the "State" button to switch between continuous mode and pulsed mode. Continuous mode emits a steady ultrasound wave and is best for deep penetration, collagen stimulation, and product absorption. Pulsed mode emits intermittent ultrasound waves and is ideal for sensitive skin, reducing puffiness, and lymphatic drainage.

After selecting the mode, adjust the power level. Use the "+" and "–" buttons to increase or decrease the ultrasound intensity. The selected power level will be displayed on the indicator panel, such as 0.2W, 0.6W, or 1.2W. It is best to start at a low setting and gradually increase if needed.

Once all settings are adjusted, start the treatment by pressing the "Start/Stop" button. The machine will begin operating according to the selected settings. Keep the probe moving in gentle circular or upward motions to ensure even treatment. If you need to adjust power, time, or the ultrasound mode during use, press the "Start/State" button to make modifications and then restart the treatment.

When the session is complete, turn off the machine and unplug it. Wipe off any excess gel from your skin and clean the probes thoroughly before storing the device.

Step 1: Prepare Your Skin

Before using the Ultrasonic Beauty Machine, cleanse your face thoroughly to remove any makeup, dirt, and oil. Use a gentle cleanser like the Glow Beauty Case Vitamin C Cleanser for a refreshing and deep cleanse. Proper cleansing ensures that ultrasound waves penetrate deeply without obstruction from impurities. Pat your skin dry with a soft towel before proceeding.

Step 2: Apply Ultrasonic Gel

To ensure optimal results, apply ultrasonic gel before starting the treatment. The gel helps ultrasound waves penetrate the skin effectively while preventing irritation. Squeeze a small amount onto your fingers or directly onto the treatment area, then spread it evenly across the skin in a thin layer. Ensure there are no dry spots, as they can reduce the ultrasound's effectiveness. Ultrasonic gel is essential for the best performance, so be sure to use a high-quality option.

Stage 3: Using the Ultrasound Mode

There are two modes available on the machine: continuous mode and pulsed mode.

Continuous mode is best for deep penetration, reducing wrinkles, improving skin elasticity, and enhancing product absorption. To use continuous mode, press the "State" button to select it, then move the probe gently in circular or upward strokes. Avoid staying in one spot for too long to prevent overheating. A recommended session length is between 8 and 15 minutes per area.

Pulsed mode is suitable for sensitive skin, treating acne scars, reducing puffiness, and improving lymphatic drainage. To use pulsed mode, press the "State" button until it is selected. Glide or gently tap the probe over the skin using light pressure, especially around delicate areas such as under the eyes. The recommended session length is 5 to 10 minutes per area.

Stage 4: Post-Treatment Care

After completing your session, follow a proper post-treatment routine to maintain your results. First, clean your skin by wiping away any leftover ultrasonic gel. Apply a hydrating serum or moisturiser to lock in the benefits. If you used the spot pen function, apply an antibacterial cream to the treated area.

Next, clean the device and probes. Turn off and unplug the machine, then wipe the probes with a soft cloth dampened with alcohol or disinfectant. Do not immerse the probes in water. Store the machine in a dry, cool place to maintain its performance.

Finally, keep your skin hydrated and protected. Drink plenty of water to support natural detoxification and avoid direct sun exposure for 24 hours after treatment. Apply a broad-spectrum SPF to protect against UV damage.

CAUTION: DO NOT USE LIQUIDS AROUND ELECTRICAL APPLIANCES.